This product is available in our stores
LUNA is the most durable LED line® ceiling lamp. It is a modern, solid LED luminaire with a high degree of protection IP65, designed for many applications.
1. Choose a practical and universal ceiling lamp.
LUNA 12W emits light with a stream of 1000lm. Second version with a capacity of 18W emits a luminous flux of 1440lm, and the third version with a power of 24W and a luminous flux of 2040lm. The wide voltage range 180-265V makes the luminaire very resistant to all voltage fluctuations in the electrical network. The light from the entire luminaire is emitted evenly at an angle of 120 °. It has a wide range of applications making it universal and practical lighting solution.
2. IK10 and IP65 – resistant to water and impact
Led Line® LUNA is ideally suited to industrial halls, corridors, stairwells, living areas and places with high humidity levels (eg in bathrooms). In areas of increased humidity and pollution, solid particles and fluids should not penetrate the luminaires. In the case of LED line® LUNA with IP65 tightness class there is no doubt. The lamp is additionally characterized by the class of mechanical strength IK10, and it’s resistant to a percussion of 20J. This is another parameter that convinces about its reliability.
3. Durable for frost and sun
Lampshade made of polycarbonate ensures that it will have the same colour for many years. Deciding on LED line® LUNA, you can be sure that its shade will not yellow exposed to the sun or over time, and the sealing elements will not crumble in the cold. The luminaire works efficiently even in very difficult conditions – in the temperature range from -20 ° C to + 45 ° C.
4. Safety of your eyes
No flickering effect will provide people working in the illuminated facility with a good frame of mind and will not cause irritation. LED line® LUNA ceiling lamp with Flicker Free technology favors maximal concentration during work.
5. You choose when it switches on
The version of LED Line® LUNA with a microwave motion sensor, operating in the settings selected by the user, does not require manual switching on and off. It’s the perfect solution for corridors or stairwells, thanks to which you will save energy, reduce costs and protect the environment. The sensor can work in three modes:
Mode 1. The dusk sensor measures the light intensity. The device allows the light to turn on automatically only after the minimum threshold has been reached, even if motion has been detected in the detection area.
Mode 2. When the light intensity reaches the minimum threshold value (dusk falls), the device sends a signal to the central unit to turn on the light source after motion detection in the detection area.
Mode 3. Depending on individual needs, the device will disconnect the power supply circuit (turn off the light) only after a specified time according to preferences. The device allows you to adjust the minimum threshold of light according to individual needs. The light will only turn on when the minimum value of light intensity is reached. The LED Line® LUNA ceiling lamp series is a reliable and universal light source with high resistance.
|Degree of IK protection:|
|IP protection class:|
IP - stopień ochrony przed penetracją czynników zewnętrznych. Oznaczenie stopień IP składa się z liter IP i dwóch do czterech znaków, z których pierwszy oznacza odporność na penetrację cieł stałych, a drugi na penetrację wody.
Pierwszy znak (IPx0): zabezpieczenie przed ciałami stałymi (zgodnie z PN-EN 60529:2003)
Drugi znak (IP0x): zabezpieczenie przed wnikaniem wody (zgodnie z PN-EN 60529:2003)
|Colour of the light:|
Color of light
This parameter specifies the total power of light emitted. Luminous flux is determined unit (Φ).
Its unit of measurement is the lumen (lm). Helpful in determining the
overall brightness of the light source which is dependent on the value
of luminous flux (lm) and the illumination angle (°).
This parameter specifies the type of LEDs used for the construction of the device. The designation "SMD" at the symbol means that the construction equipment is used diode paving (ang. Surface Mount Device).
Parameter specifies the focusing of the beam in degrees (°). Helpful in determining the overall brightness of the light source which is dependent on the value of luminous flux (lm) and the illumination angle (°).
|Dimensions (L. x W x H.)::|
30 000 hours
|Weight with packaging:|
|Number of on/off cycles:|
|Lamp warm-up time to 60%:|
|Luminous flux after 30 000 h:|
|Colour rendering index:|